Description:

 MATERIAL: Extruded 6063 T6 aluminum alloy with self
lubricating polyester thrust bearings.
 LENGTHS: 83", 85", 95" and 120" lengths standard for 
nominal door heights. Custom lengths are available.
 LOAD/FREQUENCY RATINGS: For 1-3/4" doors.  
48" max. door width in 16 gauge hollow metal (min.)  
or 1/8" aluminum (min.).
 Standard Duty — Tested per BHMA standards for 
medium-frequency doors up to 200 lb. without frame 
or door reinforcement.
 Heavy Duty — Tested per BHMA standards. Up 
to 200 lb. doors (high-frequency) and up to 400 lb. 
doors (medium-frequency) without frame or door 
reinforcement; up to 600 lb. doors (low-frequency) 
with the use of Rivnuts in the frame and door. 
Heavy Duty (LL) — Our HD hinge with additional 
fastener holes for low-frequency doors up to  
1,000 lb., including most lead-lined doors. Rivnuts  
are recommended in the frame and door on  
extremely tall, extremely heavy or wide doors.
 FINISHES: All SL11 hinges are stocked in Clear, Dark 
Bronze and Black anodized aluminum. Custom 
anodized or painted finishes are available. Product 
painted or anodized in the field voids the SELECT 
hinge warranty.
 CLOSERS: Conventional overhead surface, concealed 
sliding arm overhead or floor closers may be used 
with SELECT hinges. Pivot-type floor closers (with  
a fixed, conflicting center pivot) must be replaced.
 ORDER: Specify length, finish and standard duty (SD),  
heavy duty (HD) or heavy duty with additional fastener 
holes (LL). Also, specify door and frame screw 
applications. 12-24 x 3/4" self-drilling, thread-forming 
410SS Phillips undercut flathead screws are provided  
as a standard pack unless otherwise specified. Wood  
and thread-forming screws also available. Security  
screws optional at extra cost.
 AVAILABLE ELECTRIC PREPS:  EPT, ATW, EMS, CTW4, 
CTW5, CTW8, CTW10, CTW12, CMG, AP and RP.  
For CTW12 prep, please consult factory for 
engineering approval.